POREX® Tubular Membrane Filter Module™

POREX® TMF 37 - Tubular Membrane Filter Modules

Optimal high solids seperation at high flux rates

POREX TMF cross-flow tubular membrane modules contain Porex’s unique, structural membrane tubes. The superior strength of the membrane/substrate composite allows higher operating and backwash pressures for superior solids removal efficiency, higher flux and reduced system footprint. The structural composite membrane features PVDF membrane bonded to PVDF substrate or anchored to PE substrate.

 37 Tubular Membrane Filter Modules

TMF Series Features:
  • Consistent, reliable solid/liquid separations and long service life
  • Unique support with PVDF membrane offers high performance tubular membrane with superior operating characteristics
  • Sintered PVDF substrate with PVDF membrane offers high temperature and improved chemical compatibility (pH range of 0–14)
  • PVDF/PVDF composite option offers increased abrasion resistance and enhanced membrane durability
  • Three distinct membrane pore sizes available on two different substrate options
  • Uniform, thermally-bonded omni-directional substrate pore structure provides an optimized support structure for tubular membranes and enhanced membrane durability
  • Now available in multiple tube quantities and diameters for increased surface area and flux
 Tubular Membrane

Chemical Resistance:

POREX TMF modules are resistant to a broad spectrum of corrosive chemicals and reagents as well as pH ranges of 0 to 14. Typically, pilot feasibility tests are needed to determine the actual TMF module performance under real operating conditions.

Operating Specifications
Pre-Use Wetting AgentIPA
Shelf Life (Original Container)36 months
Water Flux >200 GFD (340 LMH)
Cross Flow Liquid Velocity 10 - 16 ft/sec (3.5 to 5.6 m/s)
pH Range 0 - 14
Max Backpulse Pressure 20 psi (138 kPa) at 25°C
Max Backpulse Cycles 75,000
Max Differential Pressure 120 psi (827 kPa) at 25°C
Max Solids 18%
Min Solids 0.25%
Max Viscosity 50 cp
Min Viscosity <1 cp


Coupling and Tubing Specifications:
Filtrate Port Vinyl Tubing Specifications
I.D. 3 in. (76.2 mm)
O.D. 3 1/2 in. (88.9 mm)
Wall Thickness 1/4 in. (6.35 mm)
Approx. Max. Pressure 21 psi at 70° F
Weight (lbs / 100 ft) 135
Gruvlok Coupling Specifications
Gruvlok Model Anvil 7001 Standard Coupling
Sized 6 in.
Standard Gasket C Style
Standard Gasket Material Grade E (EPDM)
suitable for most applications
Approx. Weight Each 11.8 lbs (5.4 kg)
Vitaulic Coupling Specifications
Victaulic Model 77 or 75 flexible coupling
Sized 6 in.
Standard Gasket Material Grade E (EPDM)
suitable for most applications
Approx. Weight Each 7 lbs (3.2 kg)
Physical Specifications
Modules
Housing Diameter 6" Sc40
Filtrate Port (Qty 1) ø2.875" x 1.89" L pipe stub
Retentate Ports 6" pipe Anvil Gruvlok groove
Mounting Required Horizontal; 2 point
Module Length 72" (1829 mm)
Tubes
Number of Tubes 37
Nominal ID .5" (12.7 mm)
Nominal OD .79" (20.07 mm)
Total Active Surface Area 27.75 ft2 (2.58 m2)
Internal Liquid Volume
Filtrate Volume 3.07 gallons (11.62 ltr)
Retenate Volume 2.26 gallons (8.52 ltr)
Total Volume 5.33 gallons (20.18 ltr)
Materials of Construction
Potting Solvent Cement
Internal Supports Polypropylene
Gasket Material None
Preservative Propylene Glycol
Membrane PVDF


Maximum CleaningSolution Strength
Bleach (NaOCl) < 17% to 100° F (38°C)
Caustic (NaOH) < 15% to 104° F (40°C)
Acid (HCl) < 15% to 140° F (60°C)
Peroxide (H2O2) < 5% to 100° F (38°C)

Item Number Description Nominal Pore Size Max Operating Temp Housing Substrate Tube

Shipping Dimensions
(inch)
(mm)

Shipping Weight
(lbs)
(kg)
MME2005637VP 37 Tube PVC Module /
PE 1” tube - 0.05μm		 0.05μ 60°C / 140°F Grade 1 PVC UHMWPE

13 x 12 x 75
331 x 205 x 1905

53.1
24.09
MME2S01637VP 37 Tube PVC Module /
PE 1” tube - 0.1μm		 0.1μ 60°C / 140°F Grade 1 PVC UHMWPE

13 x 12 x 75
331 x 205 x 1905

53.1
24.09
MME2S05637VP 37 Tube PVC Module /
PE 1” tube - 0.5μm		 0.5μ 60°C / 140°F Grade 1 PVC UHMWPE

13 x 12 x 75
331 x 205 x 1905

53.1
24.09
MME2005637VC 37 Tube CPVC Module /
PE 1” tube - 0.05μm		 0.05μ 80°C / 176°F CPVC UHMWPE

13 x 12 x 75
331 x 205 x 1905

55.3
25.08
MME2S01637VC 37 Tube CPVC Module /
PE 1” tube - 0.1μm		 0.1μ 80°C / 176°F CPVC UHMWPE

13 x 12 x 75
331 x 205 x 1905

55.3
25.08
MME2S05637VC 37 Tube CPVC Module /
PE 1” tube - 0.5μm		 0.5μ 80°C / 176°F CPVC UHMWPE

13 x 12 x 75
331 x 205 x 1905

55.3
25.08
MMV2005637VP 37 Tube PVC Module /
PVDF 1” tube - 0.05μm		 0.05μ 60°C / 140°F Grade 1 PVC PVDF

13 x 12 x 75
331 x 205 x 1905

74.6
33.84
MMV2S01637VP 37 Tube PVC Module /
PVDF 1” tube - 0.1μm		 0.1μ 60°C / 140°F Grade 1 PVC PVDF

13 x 12 x 75
331 x 205 x 1905

74.6
33.84
MMV2S05637VP 37 Tube PVC Module /
PVDF 1” tube - 0.5μm		 0.5μ 60°C / 140°F Grade 1 PVC PVDF

13 x 12 x 75
331 x 205 x 1905

74.6
33.84
MMV2005637VC 37 Tube CPVC Module /
PVDF 1” tube - 0.05μm		 0.05μ 80°C / 176°F CPVC PVDF

13 x 12 x 75
331 x 205 x 1905

76.7
34.79
MMV2S01637VC 37 Tube CPVC Module /
PVDF 1” tube - 0.1μm		 0.1μ 80°C / 176°F CPVC PVDF

13 x 12 x 75
331 x 205 x 1905

76.7
34.79
MMV2S05637VC 37 Tube CPVC Module /
PVDF 1” tube - 0.5μm		 0.5μ 80°C / 176°F CPVC PVDF

13 x 12 x 75
331 x 205 x 1905

76.7
34.79

PDF File: 
application/pdf icon
TMF37-Tube_DataSheet.pdf