1.1-Tube Modules

 

POREX ® TMF 1.1 - Submicron Filtration with TMF Modules

Single tube wastewater filters

POREX TMF cross flow single tube wastewater filters contain POREX’s unique, structural membrane tubes. Used for submicron filtration, the superior strength of the membrane/substrate composite allows higher operating and backwash pressures. The structural composite membrane features PVDF membrane bonded to PVDF substrate or anchored to PE substrate.

1.1 Tubular Membrane Filter Modules

 


TMF Series Features:
  • Consistent, reliable solid/liquid separations and long service life
  • Unique support with PVDF membrane offers high performance tubular membrane with superior operating characteristics
  • Sintered PVDF substrate with PVDF membrane offers high temperature and improved chemical compatibility (pH range of 0–14)
  • PVDF/PVDF composite option offers increased abrasion resistance and enhanced membrane durability
  • Three distinct membrane pore sizes available on two different substrate options
  • Uniform, thermally-bonded omni-directional substrate pore structure provides an optimized support structure for tubular membranes and enhanced membrane durability
  • Now available in multiple tube quantities and diameters for increased surface area and flux
Tubular Membrane

Chemical Resistance:

POREX TMF modules are resistant to a broad spectrum of corrosive chemicals and reagents as well as pH ranges of 0 to 14. Typically, pilot feasibility tests are needed to determine the actual TMF module performance under real operating conditions.

 

 

Operating Specifications
Pre-Use Wetting Agent IPA
Water Flux >200 GFD (340 LMH)
Cross Flow Liquid Velocity 10 - 16 ft /sec (3.5 to 5.6 m/s)
pH Range 0 - 14
Max Backpulse Pressure 20 psi (138 kPa) at 25° C
Max Differential Pressure 60 psi (414 kPa) at 25° C
Max Solids 18%
Min Solids 0.25%
Max Viscosity 50 cp
Min Viscosity  


Maximum CleaningSolution Strength
Bleach (NaOCl) < 17% to 100° F ( 38°C )
Caustic (NaOH) < 15% to 104° F ( 40°C )
Acid (HCl) < 15% to 140° F ( 60°C )
Peroxide (H2O2) < 5% to 100° F ( 38°C )
 
Physical Specifications
Modules
Housing Diameter 1.50" Sc40
Filtrate Port (Qty 1) .75" NPT Female
Concentrate Ports 1.25" pipe stub
Mounting Required Horizontal; 2 point
Module Length 72" ( 1829 mm )
Tubes
Number of Tubes 1
Nominal ID 1" ( 25.4 mm )
Nominal OD 1.34" ( 34 mm )
Total Active Surface Area 1.52 ft 2 (0.141 m 2 )
Internal Liquid Volume
Filtrate Volume 0.21 gallons (0.795 ltr)
Concentrate Volume 0.24 gallons (0.908 ltr)
Total Volume 0.45 gallons (1.703 ltr)
Materials of Construction
Potting Solvent Cement
Internal Supports None
Gasket Material None
Preservative Propylene Glycol
Membrane PVDF

 

 

Item NumberDescriptionNominal Pore SizeMaximum
Continuous
Operating
Temperature
HousingSubstrate Tube

Shipping Dimensions
(inch)
(mm)

Shipping Weight
(lbs)
(kg)

MME3005601VP 1 Tube PVC Module /
PE 1” tube - 0.05μm
0.05μ 43°C / 110°F Grade 1 PVC UHMWPE

4 x 4 x 74
102 x 102 x 1880

6
2.72

MME3S01601VP 1 Tube PVC Module /
PE 1” tube - 0.1μm
0.1μ 43°C / 110°F Grade 1 PVC UHMWPE

4 x 4 x 74
102 x 102 x 1880

6
2.72

MME3S05601VP 1 Tube PVC Module /
PE 1” tube - 0.5μm
0.5μ 43°C / 110°F Grade 1 PVC UHMWPE

4 x 4 x 74
102 x 102 x 1880

6
2.72

MME3005601VC 1 Tube CPVC Module /
PE 1” tube - 0.05μm
0.05μ 43°C / 110°F CPVC UHMWPE

4 x 4 x 74
102 x 102 x 1880

6.8
3.08

MME3S01601VC 1 Tube CPVC Module /
PE 1” tube - 0.1μm
0.1μ 43°C / 110°F CPVC UHMWPE

4 x 4 x 74
102 x 102 x 1880

6.8
3.08

MME3S05601VC 1 Tube CPVC Module /
PE 1” tube - 0.5μm
0.5μ 43°C / 110°F CPVC UHMWPE

4 x 4 x 74
102 x 102 x 1880

6.8
3.08

MMV3005601VP 1 Tube PVC Module /
PE 1” tube - 0.05μm
0.05μ 60°C / 140°F Grade 1 PVC PVDF

4 x 4 x 74
102 x 102 x 1880

7
3.18

MMV3S01601VP 1 Tube PVC Module /
PE 1” tube - 0.1μm
0.1μ 60°C / 140°F Grade 1 PVC PVDF

4 x 4 x 74
102 x 102 x 1880

7
3.18

MMV3SO5601VP 1 Tube PVC Module /
PE 1” tube - 0.5μm
0.5μ 60°C / 140°F Grade 1 PVC PVDF

4 x 4 x 74
102 x 102 x 1880

7
3.18

MMV3005601VC 1 Tube CPVC Module /
PE 1” tube - 0.05μm
0.05μ 80°C / 176°F CPVC PVDF

4 x 4 x 74
102 x 102 x 1880

7.8
3.54

MMV3S01601VC 1 Tube CPVC Module /
PE 1” tube - 0.1μm
0.1μ 80°C / 176°F CPVC PVDF

4 x 4 x 74
102 x 102 x 1880

7.8
3.54

MMV3S05601VC 1 Tube CPVC Module /
PE 1” tube - 0.5μm
0.5μ 80°C / 176°F CPVC PVDF

4 x 4 x 74
102 x 102 x 1880

7.8
3.54